Skip to content
Serving Austin and the surrounding Central Texas area — we come to you
Book today(866) 780-7033
Our Services

Ceramic Coating in Austin, TX

CeramicX coating being applied by hand — Scarabbodyworks Detailing in Austin, TX

What Is Ceramic Coating?

Ceramic coating is a liquid polymer applied by hand over a fully corrected paint surface. Once it cures, it bonds to the clear coat and creates a layer of protection that ordinary wax cannot match.

The coating resists UV fading, chemical staining, and minor scratches, and it makes the surface hydrophobic, so water and dirt bead up and slide off instead of sitting on the paint.

Ceramic coated vehicle beading water — Scarabbodyworks Detailing in Austin, TX

Texas sun does not go easy on paint. UV rays, sap, bird droppings, and road grime attack a clear coat every time your vehicle sits outside, and Austin summers make that worse than most cities ever see.

Regular washing keeps a car clean, but it does not stop oxidation or swirl marks from building up underneath. Ceramic coating adds a hard, transparent layer that shields the paint and keeps it looking finished long after a standard wash would fade.

What Is Included

Paint correction before coating — Scarabbodyworks Detailing in Austin, TX
Prep and Correction

Paint Prep and Correction

  • Full decontamination wash to strip wax, sealant, and road film
  • Clay bar treatment to remove embedded contaminants
  • Machine polish to correct swirl marks and light oxidation
  • Panel wipe-down to remove polishing oils before coating
Book today
CeramicX coating applied panel by panel — Scarabbodyworks Detailing in Austin, TX
Ceramic Application

CeramicX Coating Application

  • Hand-applied CeramicX ceramic coating across every exterior panel
  • Coating extended to wheel faces and exterior trim
  • Controlled cure time before the vehicle leaves our care
  • Final inspection under direct light to confirm even coverage
Book today

Our Ceramic Coating Process

  1. 01

    Inspection

    We walk the vehicle in full light and check the paint condition before recommending a coating plan.

  2. 02

    Wash and Decontamination

    We strip away old wax and sealant, then clay bar the surface so nothing sits between the paint and the coating.

  3. 03

    Paint Correction

    We machine polish the paint to correct swirl marks and light oxidation before coating goes on. Heavy oxidation may not fully correct, and we will tell you honestly what to expect.

  4. 04

    Coating Application

    We hand-apply the CeramicX coating in controlled conditions and let it cure fully before the vehicle is exposed to the elements.

Ceramic coating process in progress — Scarabbodyworks Detailing in Austin, TX

Add-On Services

Headlight restoration — Scarabbodyworks Detailing in Austin, TX

Headlight Restoration

Clouded, yellowed headlights cut into how much light reaches the road at night. We restore clarity so your headlights work as well as they look.

Ozone odor treatment setup — Scarabbodyworks Detailing in Austin, TX

Ozone and Odor Treatment

Smoke, pets, and spills leave odors that regular cleaning cannot reach. Ozone treatment breaks down odor at the source instead of masking it.

Headliner and stain removal — Scarabbodyworks Detailing in Austin, TX

Headliner and Stain Removal

Set-in stains and a sagging or discolored headliner age a vehicle fast. We treat both with targeted cleaning built for those surfaces.

Finished ceramic coated paint — Scarabbodyworks Detailing in Austin, TX

Why Ceramic Coating Matters in Central Texas

Austin summers push paint through months of intense UV exposure, and that breaks down clear coat faster than most owners expect. Ceramic coating slows that breakdown and keeps the paint looking new for years instead of months.

It also makes maintenance easier. Bugs, tree sap, and brake dust wipe away instead of baking into the clear coat, so the vehicle stays protected between visits.

Pair it with our full detailing service before coating to make sure every surface starts from a fully corrected finish.

Follow Us On Social Media

We post before-and-after coating work and mobile setups across Central Texas. Follow along to see the CeramicX finish in real light.

Scarabbodyworks Detailing owner with the mobile unit — Scarabbodyworks Detailing in Austin, TX

Frequently Asked Questions

How long does ceramic coating last?

It depends on the package. We offer coatings built for one year of protection, multi-year protection, and longer-term coatings for owners who want maximum durability. We will walk you through which option fits how you use your vehicle.

Will ceramic coating remove swirl marks and scratches?

The paint correction step before coating removes light swirl marks and oxidation. Heavy oxidation or deep scratches may not fully correct, and we will tell you honestly what the paint can achieve before we coat it.

Do I still need to wash my car after it is coated?

Yes. Ceramic coating protects the paint, it does not replace washing. Regular washes keep the coating performing the way it should and make future washes faster and easier.

What product do you use?

We apply CeramicX ceramic coating, hand-applied panel by panel after full paint correction.

Can you coat my wheels and trim too?

Yes, coating extends to wheel faces and exterior trim as part of the service.

Get Your Ceramic Coating Scheduled

Protect your paint before another Austin summer takes its toll. Reach out and we will map out the right coating package for your vehicle.

Book today

Website proudly developed and managed by Detailer Systems.
The all-in-one marketing platform helping car detailers get more bookings.

All Rights Reserved | Detailer Systems | Scarabbodyworks Detailing © 2026